• Over 46 million magnets in stock
  • Customer service in 3 languages
The product was added to your shopping cart.
Go to shopping cart

Neodymium magnet system Ø 22 mm white rubber-coated with screw socket, holds approx. 5,9 kg

thread M4


Item number TCNGW-22
Strength approx. 5,9 kg
Displacement force approx. 1,8 kg
Unit of Sale 1 piece
Price and rebate
1 pc. 4,38 EUR ea.
from 3 pcs. 3,86 EUR ea.
from 10 pcs. 3,40 EUR ea.
from 20 pcs. 3,18 EUR ea.
from 40 pcs. 2,97 EUR ea.
Ask for a rebate from 220 pcs.
incl. VAT plus shipping

4,38 EUR

incl. VAT plus shipping

promptly deliverable

Available: 7 842 pieces

Delivery time: 2-6 business days

Quant.

  • Purchase on account

Description

These neodymium magnet systems have a threaded socket into which you can screw hooks, eyelets etc. The white rubber coating protects delicate surfaces from scratches and at the same time increases the load capacity in shear direction. The rubber protects the magnet from occasional moisture and splashes. Permanent outdoor use, however, may lead to the formation of rust. Our ferrite pot magnets, on the other hand, are rust-proof.

Compared to standard pot magnets without a rubber coating, these rubberised magnet systems are thinner and more discreet. There is a steel plate under the white rubber coating with one ring magnet that has a multipolar magnetisation. As a result, you will be able to combine these magnet systems with each other. But please be careful, because once two of these magnet systems are fully joined, it will be very difficult to separate them again.

Please note: Carefully tighten the screws, hooks, etc. inside the screw socket only as far as they will go.

The full adhesive force is achieved when the ferromagnetic counterpart is smooth and of sufficient thickness and when the magnet system makes direct and full flush contact. Magnet systems already start to lose part of their adhesive force at a small distance from the ferromagnetic surface. This characteristic is more pronounced in magnet systems than in other ferrite and neodymium magnets. You can find additional fascinating information on our FAQ page about magnet system characteristics.

Technical data

Article ID TCNGW-22
EAN 7640172692158
Material NdFeB
Strength approx. 5,9 kg (approx. 57,9 N)
Displacement force approx. 1,8 kg (approx. 17,4 N )
Colour White
Diameter D 22 mm
Neck diameter d1 8 mm
Pot height H1 6 mm
Total height H2 11,5 mm
Thread size M4
Tolerance +/- 0,5 mm
Covering Rubber (TPV)
Magnetisation N42
Max. working temperature 80°C
Product version With screw socket
Weight 13 g

The structure of magnet systems


In magnet systems, one or several magnets are mounted on a steel plate with alternating poles. This concentrates the adhesive force of the magnets on one side of the system which, in turn, has a positive effect on the adhesive force. The steel plate with the magnets is encased in rubber. For more information, please refer to our FAQ page on the characteristics of magnet systems.

Recommended accessories for this product

Load...
threaded eyelet bolts 4 mm inner diameter, steel, nickel-coated, thread M4
10 pcs. 0,22 EUR ea.*
Available: 54 280 pcs.
without shaft, according to SN EN ISO 4762, not magnetic!
10 pcs. 0,20 EUR ea.*
from 500 pcs. 0,15 EUR ea.*
from 1 000 pcs. 0,10 EUR ea.*
Available: 4 580 pcs.
metal discs with countersunk hole Ø 23 mm, as a counterpart to magnets, these are not magnets!
10 pcs. 0,38 EUR ea.*
from 40 pcs. 0,32 EUR ea.*
from 80 pcs. 0,30 EUR ea.*
from 160 pcs. 0,28 EUR ea.*
Ask for a rebate from 2 500 pcs.
Available: 40 240 pcs.
screw hooks 5,5 mm inner diameter, steel, nickel-coated, thread M4
10 pcs. 0,24 EUR ea.*
Available: 264 840 pcs.